AYRE QB-9DSD - Manual (Page 7)

AyreLink Ports
The AyreLink communication system provides a
convenient way to control your audio system. There
are two AyreLink ports on the rear panel of the
QB-9
DSD
D/A converter. Each port contains both an
input and an output. Both ports function identically
and may be used interchangeably.
The linked components may be
joined in any convenient
order.
AyreLink connections are made with commonly
available two-line telephone line cords using
modular (RJ-11) connectors. (These are the cords
that connect the telephone set to the wall in many
countries.) They are readily available in different
lengths and various colors at most electronics stores.
Be sure to use two-line telephone
cords to make AyreLink connections,
identifiable by four gold contacts on
each connector. Single-line cords with
only two gold contacts will not
function in this application.
The linked components should be connected in
daisy-chain fashion, connecting each component to
5