Bettermaker EQ 232P Remote - Manual (Page 13)

13
2) Press and hold CH for about 1 second to switch the unit to dual mono; the indicator now displays 1 showing
you are in control of channel 1. The state of channel 1 is remembered from the last time the dual mono state was
used, so no information will be lost when switching back and forth between Linked and Dual Mono states. When
unlinking, both channels receive the same setting (setting of chnnel 1). So If you use the dual mono mode, be
aware that linking it back will copy channel 1 setting to channel 2.
3) Press CH (a short brief touch) and the indicator displays 2 showing you are in control of channel 2. You can
alternate between controlling channel 1 or 2 by a simple short press of the CH button.
4) Press and hold CH (for about 1 second) and the equalizer returns to LINK mode.
It is possible to transfer or copy settings from channel to channel using the Presets (See Part V ).
USB Activity
The USB LED lights up when the EQ232P is connected to a host computer. Activity shows up as USB LED
blinking.
M/S Customization Option
By default the Bettermaker EQ232P ships as a stereo/dual mono device. However due to demand, we have also
created a replacement customization allowing analog M/S encoding/decoding within the unit with no external
hardware needed. This allows all filter sections of the EQ232P to be applied to either the full stereo, or selectively
to the Mid (Channel 1), or Side (Chennel 2) component signals. This matrix replaces the stereo unlink function,
and units outfitted with M/S are no longer able to run in dual mono. The internal matrix is gain compensated for
equal level analog encode/decode and is performed entirely in the analog domain.