BUCHI Rotavapo R-215 User Manual
Rotavapor, Operation manual
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- 1 About this manual
- 2 Safety
- 3 Technical data
- 4 Description of function
- 5 Putting into operation
- 5.1 Installation site
- 5.2 Electrical connections
- 5.3 Commissioning the heating bath
- 5.4 Glass assembly
- 5.5 Installing the condenser and the seal
- 5.6 Installing the reflux insert
- 5.7 Mounting the support rod (optional accessory)
- 5.8 Tube connections
- 5.9 Installing the vacuum controller
- 5.10 Cable connections to the Rotavapor
- 5.11 Installing the vapor temperature sensor
- 5.12 Functional test
- 6 Operation
- 6.1 Settings at the heating bath
- 6.2 Immersion angle of the evaporating flask into the heating bath
- 6.3 Lowering and raising the evaporating flask into and out of the heating bath
- 6.4 Selecting the distillation conditions
- 6.5 Distilling
- 6.6 Optimizing the distillation conditions
- 6.7 When the distillation “dies out”
- 7 Maintenance
- 8 Troubleshooting
- 9 Shutdown, storage, transport and disposal
- 10 Spare parts
- 11 Declarations and requirements