BUCHI Vacuum Controller V-855 - Manual (Page 18)

6 Operation
18 Distillation Record 1.2 Operation Manual
1 st submenu 2 nd submenu
"Y-Axis" "Temperature" ➡ Set temperature axis min./max. scale range (fixed scale enabled).
"Rotation" ➡ Set rotation axis min./max. scale range (fixed scale enabled).
"Pressure" ➡ Set pressure axis min./max. scale range (fixed scale enabled).
Disable "Fixed Scale" to activate variable scale settings.
"Graphs" "Graphs settings"
➡ Set graph colors and pen width.
NOTE
· Trendchart generation is always based on min./max. scale range.
· After any change of settings a confirmation message is shown. Here, all changes can be stored,
discarded or reset to standard values.
6 .2 Record a Distillation process
6 .2 .1 Program overview
Follow the description in section 5.3 to start the software and establish a link to the vacuum controller.
The following figure shows the start-up view: