Chauvet 86 - Manual (Page 9)

4. Operating Instructions
9 1/6/2010 10:35 AM
Sound-Active
This fixture has a sound-triggered mode. This is accessed via the DIP switches on the back of the
fixture, and the sensitivity may be adjusted using the audio sensitivity adjustment knob. Please see
the chart below for further explanation.
Mode DIP switches
Sound 1~10 = Off
Strobe
This fixture has a strobe mode. This is accessed via the DIP switches on the back of the fixture, and
the sensitivity may be adjusted using the audio sensitivity adjustment knob. Please see the chart
below for further explanation.
Mode DIP switches
Strobe 9 = On
Static
This unit has 3 different standalone static dimming levels. These are accessed via the DIP switches
on the back of the fixture. Please see the chart below for further explanation.
Mode DIP switches
Minimum Intensity 1 = On
Medium Intensity 2 = On
Maximum Intensity 1, 2 = On
Fixture Linking
In order to use this fixture in a DMX or master/slave operation, you must daisy chain, using DMX
cables to link from one fixture to another.
DMX Channel Values
C HANNEL V ALUE F UNCTION
1
000  255 Dimmer
Intensity 0%~100%
7
000  010
011  255 Strobe
No Function
Strobe Slow ~ fast
Additional signal
link out