Cannon Instrument miniPV Addendum - Manual (Page 8)

SECTION 6:
Analysis Configuration Options:
Intrinsic Viscosity Package:
Intrinsic Viscosity Report is derived from sample data in the
VISCPRO® database. Several powerful filters are used to select
desired data. These filters may be used by making selections from
the tabbed property sheets (Date, Sample and Poly Report) found
in the Polymer Analysis Configuration window for the report. Once
the appropriate filters have been determined, the resulting report
configuration can be saved for future use.
The Polymer Intrinsic Viscosity Report displays the sample data in
both tabular and graphic formats. Data from selected samples is
plotted and extrapolated to "0" concentration and beyond to
determine a value for intrinsic viscosity.
The following data can be included in the report:
Sample ID—Sample identification
Conc(g/dl)—Concentration (in grams per deciliter)
RV—Relative viscosity
Inh. Visc.—Inherent viscosity
Red. Visc.—Reduced viscosity
Slope—Slope of the "best fit" lines calculated from data points
derived from inherent and reduced viscosity