Checkline DT-5TG - Manual

Instruction Manual
Panel Mount Tachometer
Model DT-5TG (VDC)
Features
Operational Precautions
! If the unit is used in a caustic environment, we
suggest you use a NEMA 4X enclosure.
! Keep unit free of vibration and shock.
! When installing unit, keep power and sensor wires
separate. Tie cable shield to terminal E (earth ground).
! After inserting wires, tighten terminal screws securely.
One of the most advanced on the market today, this
microprocessor-based panel tachometer not only mea-
sures rotational, linear and flow rate speeds, but can also
function as an elapsed time counter and ratio meter. By
choosing the desired input/output module(s), you can
design virtually any system imaginable.
! Mounts easily — no brackets or screws or any other
hardware needed.
! Tolerates a wide variation of voltages.
! Immune to electrically noisy environments.
! Programmable parameters and functions via front
panel membrane push-button switches.
! Accepts a variety of input and output modules
! No need to remember mathematical formulas.
! Highly accurate.
! Self-testing.
Dimensions (mm)
ELECTROMATIC
E Q U I P M E N T C O ., I N C .
600 Oakland Ave., Cedarhurst, NY 11516–U.S.A.
T E L : 5 1 6 - 2 9 5 - 4 3 0 0
• FA X : 5 1 6 - 2 9 5 - 4 3 9 9
CHECK • LINE ®
INSTRUMENTS