Checkline FGS-250W - Manual

z
FGS-250W Manual Hand Wheel Test Stand
Operation Manual
The rated load of the test stand is 250 lb (125 kg).
The maximum displacement is 9˝(230 mm) without
optional tensile tester. Do not overload or damage to
the test stand can occur.
Do not use the test stand in water or oil or allow any
liquids to get into the moving mechanisms of the
stand. Improper operation and malfunction will result.
Do not disassemble, repair or alter the test stand.
Warranty will be voided and damage may result.
SPECIFICATIONS
Capacity: Up to 250 lbf (125 kg); 143 lbf (65 kg) with optional
Tensile frame.
Travel:
0.12˝ (3 mm)/turn
Stroke: 9˝ (230 mm) max.; 10.24˝ (260 mm) max. with Tensile
Frame kit.
Dimension:
9.8 x 7.7 x 17.5˝ (250 x 196 x 445 mm)
Weight: 15.4 lb (7 kg)
Warranty: 1 year
Packing List: Test Stand (1), Handle in Hand Wheel (1), Adapter
Screw (M6) (1), Screw M4 x 16 (for force gauge) (6)
9
6
6
0
40
57
5-M6
250
57
4
4
5
196
2
3
0
(m
a
x
)
13.8
Level adjust bolt
40
2
5
2
5
2
5
2
5
10- 5 Ø
The FGS-250W Manual Hand Wheel Operated Test Stand is
specifically designed for tensile and compressive force testing
and destructive or failure testing for research applications in a
multitude of industries.
The FGS-250W movement is created from a trapezoidal screw
drive with integral nut. Combined with its top-mounted wheel
that smoothly turns with minimal effort, fine, stable resolution is
achieved during operation.
The FGS-250W offers dual functionality by being able to be used
in either the vertical or horizontal positions with no added equip-
ment required. Simply lay unit on its back and level with the ad-
justment screw and you now can run horizontal tests.
Optional accessories include a Digital Scale and a Tensile Frame
adapter kit which enables extended clearance for tensile tests.
BASE PLATE HANDLE
FORCE GAUGE
FIXTURE ATTACHMENT
MOUNTING
GAUGE MOUNTING
PLATE
HORIZONTAL
26
0(
m
ax
)
12
5(
m
ax
)