Coway AP-1503CHE - Manual (Page 21)

Safety
Information
Operating
Instructions
T
roubleshooting
T
ips
C
ustomer
S
ervice
Unplug power plug before cleaning.
Install the RBD Plasma filter and the Antibacterial Catalysis filter
in the unit after complete dry.
WARNING
RBD Plasma Antibacterial Catalysis Filter
Please open the filter cover by pulling the
right side of the cover. ●
Please take out the plasma antibacterial
catalysis filter, and then divide the filter
into two pieces by pushing both hooks
of the filter. ●
When you clean the RBD plasma filter,
please wipe the tungsten wire, the dirties
on the electrode with a wet cloth and then
make it dry with a dry cloth. ●
※ Never splash the water in the unit or
soak it in water.
※ Be careful about the down of the tungsten wire.
※ Please completely dry, in case that the water gets
into the inside of the filter. (If the inside is taken by
water, please use after dry over 12 hours.)
�