Replacing remote control batteries – Code Alarm CA 4053 User Manual
Page 5
5
2012 Audiovox Electronics Corporation. All rights reserved.
Replacing Remote Control Batteries
1 Way Remote Control, CATX1B:
The batteries (model CR2016) inside each remote control should last approximately
1 year under normal use. When the batteries become weak you will notice the
remote control range (the distance from the vehicle the remote control will work)
deteriorate and the small LED on the remote control will dim. To replace the remote
control batteries:
1.
Unsnap and disassemble the halves of the remote control.
2.
Remove the old batteries, observing the +/- symbols on the batteries
and replace with new CR2016 batteries.
3.
Reassemble the halves of the remote control.
4.
Test operation of the remote control.
2 Way Remote Control, CATX1TW - ca4553 Only:
The battery (model CR2032) inside each remote control should last approximately
10 months under normal use. When the battery become weak you will notice the
remote control range (the distance from the vehicle the remote control will work)
deteriorate and the small LED on the remote control will dim. To replace the remote
control battery:
1.
Remove 3 screws and disassemble the halves of the remote control.
2.
Remove the old battery, observing the +/- symbols on the battery
and replace with a new CR2032 battery.
3.
Reassemble the halves of the remote control and install the 3 screws.
4.
Test operation of the remote control.