Talkswitch 48 - Manual (Page 114)

115 Appendices
DTMF
<flash>5
500-509
500-509
<flash>6
61
60
7 + 1xx
<flash>7
80
81-88, 9
8
9
Function performed
Disconnects current caller and
reconnects immediately to the last
caller put on hold.
Call Parking Spaces - 10 in total for
the entire system.
Parked Call Retrieval
Conference Call for 3 parties.
Enables 'Do Not Disturb' at the
current extension
Disables 'Do Not Disturb' at the
current extension.
Call Pick up - Extension Specific
Hold Retrieve - used for retrieving any
calls placed on hold at that extension.
Accesses Same Line Connect when
transferring an outside caller to
another outside number.
Line Hunt Groups used to access a
line.
Play music source through PA output
Call Pick up
Enters command mode
Notes
Action performed after putting a caller on Hold
and dialing an intended destination.
Press 'flash' to place a call on hold, then assign
a parking space 500-509.
Direct dial 500-509 from dial tone to pick
up a parked call.
Press 'flash' to put the first caller on hold, dial
another extension or external number, then
press 'flash' 6.
Direct Dial 61 at a local extension. User will
hear confirmation. Reminder is played
every time the extension is picked up.
Direct Dial 60 at a local extension. User will
hear confirmation.
Direct dial from dial tone to pick up a call
ringing at another extension at anytime includ-
ing after the Auto Attendant answers.
Direct dial from dial tone or by pressing 'flash'
then 7 to cycle through on a first in / first out
basis.
Put the caller on Hold, dial 80, and then dial
the outside number. Hang up to complete the
transfer. Can only be used when the line has
3-Way Calling/Conference or Transfer
(Centrex/Plexar) service.
Direct dial from dial tone.
Direct dial from dial tone to toggle on or off
music through the PA port. Useful for office
background music.
Direct dial from dial tone to pick up a call
ringing at any other extension.
Direct dial at a Local Extension
If you have Direct Line Access enabled at your Local Extension, then you must first press ‘flash’
before using most of the functions listed.
TS-user manual 7th ED v3 Release.qxd 8/27/02 4:57 PM Page 115