Checkline PM3 - Manual (Page 2)

 Electromatic Equipment Co. Inc.
-2-
1.0 GENERAL INFORMATION
In the device different calibration curves are stored. If the material to be
measured does not conform to any of the stored curves, a new calibration curve
can be created by the customer himself. In the following pages you will find
instructions for creating your own calibration curve.
Depending on the material that you want to test it is up to you to select the
appropriate drying method and moisture determination.
In principle it the setting of your own curve is done assigning a moisture
percentage to a reference voltage that is measured by the gauge.
2.0
UNLOCK THE HUMIMETER
In this menu, the hidden functions (grey letters) of the device can temporarily be
unlocked until the next turn-off of the device. You just have to enter the super-
user password.
To use this protected features, you have to enter the four digit password.
Provided by the factory, this password is the serial number. The four digit serial
number is shown in the menu item “status” or when the device is booting.
How to enter the menu point „unlock“:
Press the “Rolling menu” button as long as you enter the main menu.
Navigate to the menu item „options“ and press the button. Navigate to the
menu item „unlock“ and press the button again.
Press the button as long as you have reached the
right number and affirm this by pressing the button.
The character will be affirmed and the cursor jumps to
the next position. Enter the four numbers of your
password and confirm it by pressing the button.
Press the button and successively to abort the
password check. The button
also contains a fast
forward function, starting when you press the button for a few seconds. The
character is affirmed after a few seconds automatically.
 Electromatic Equipment Co. Inc.
-7-
9.0 Warranty
Electromatic Equipment Co., Inc. (Electromatic) warrants to the original
purchaser that this product is of merchantable quality and confirms in kind and
quality with the descriptions and specifications thereof. Product failure or
malfunction arising out of any defect in workmanship or material in the product
existing at the time of delivery thereof which manifests itself within one year
from the sale of such product, shall be remedied by repair or replacement of
such product, at Electromatic’s option, except where unauthorized repair,
disassembly, tampering, abuse or misapplication has taken place, as
determined by Electromatic. All returns for warranty or non-warranty repairs
and/or replacement must be authorized by Electromatic, in advance, with all
repacking and shipping expenses to the address below to be borne by the
purchaser.
THE FOREGOING WARRANTY’S IN LIEU OF ALL OTHER WARRANTIES,
EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE
WARRANTY OF MERCHANTABILITY AND FITNESS FOR ANY PARTICULAR
PURPOSE OR APPLICATION. ELECTROMATIC SHALL NOT BE
RESPONSIBLE NOR LIABLE FOR ANY CONSEQUENTIAL DAMAGE, OF
ANY KIND OR NATURE, RESULTING FROM THE USE OF SUPPLIED
EQUIPMENT, WHETHER SUCH DAMAGE OCCURS OR IS DISCOVERED
BEFORE, UPON OR AFTER REPLACEMENT OR REPAIR, AND WHETHER
OR NOT SUCH DAMAGE IS CAUSED BY MANUFACTURER’S OR
SUPPLIER’S NEGLIGENCE WITHIN ONE YEAR FROM INVOICE DATE.
Some State jurisdictions or States do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitation may not apply to
you. The duration of any implied warranty, including, without limitation, fitness
for any particular purpose and merchantability with respect to this product, is
limited to the duration of the foregoing warranty. Some states do not allow
limitations on how long an implied warranty lasts but, not withstanding, this
warranty, in the absence of such limitations, shall extend for one year from the
date of invoice.
Electromatic Equipment Co., Inc.
600 Oakland Ave. Cedarhurst, NY 11516 - USA
Tel: 1-800-645-7330 / Tel: 516-295-4300 / Fax: 516-295-4399
Every precaution has been taken in the preparation of this manual. Electromatic assumes
no responsibility for errors or omissions. Neither is any liability assumed for damages
resulting from the use of information contained herein. Any brand or product names
mentioned herein are used for identification purposes only, and are trademarks or
registered trademarks of their respective holders.