COP-USA CHLP120IR-EF - Manual

CHLP120IR‐EF
User's Manual
This Button is located inside the Housing in the back
of the Box Camera.
Press the center Button to Enter the OSD Menu.
Move Up or Down to move thru the menu options and left or right to
change values on the menu.
Once changed just exit and settings will be saved automatically.
If using a RS485 connection, use these settings:
Pelco‐D ,2400bps ,ID 01, press IRIS OPEN to enter the menu .
Use UP/DOWN LEFT/RIGHT on the PTZ controller or DVR to go through the
MENU
GENERAL
AWB
AE
D&N
MOTION
PRIVACY
COMM
RESET
Packing List:
‐ 1 Arlen Screwdriver
‐ 1 Bracket
‐ 1 kit with screws and anchors
‐ 1 Specification Sheet
‐ 1 DC connector