COP-USA CD75IP - Manual (Page 3)

Safety notice
This content is designed to ensure that user can use this product correctly, so as to avoid risk or
property loss. Please read this operational manual carefully before using this product, and keep the
manual properly for future reference.
Precautions are divided into 2 parts: “Warning” and “Notice” as shown below:
Warning: serious injury may be resulted when the warning item is ignored.
Notice: property loss may be resulted when the notice item is ignored.
Warning:
1. Please use the power supply with safety low voltage requirement and conforming to rated 12V
DC supply of limited power source.
2. If the device do not work properly, please contact the company where the device was bought
or to the nearest service center, never dismantle or modify this device in any way (problem
resulted from unauthorized modification or repair will not be covered by manufacturer’s
warranty).
3. In order to reduce the risk of fire or electric shock, do not service this product under rain or
moisture.
4. The installation should be carried out by professionals, and conforming to local regulations.
Notice:
1. Before running camera, please check that the power supply voltage is correct.
2. Handle this product carefully. Do not drop or cause shocks on to the product.
3. Please do not touch the optical parts of the image sensor; if cleaning is necessary, Please use a
clean soft moist cloth with alcohol to wipe off dirt.
4. Never expose the product to a extremely hot or extremely cold (normal working temperature:
-10°C~70°C) or to a strong electromagnetic radiation.
5. Never allow water or other elements to reach into the DVS/IP Camera.
6. If a DVS/IP Camera needs to be returned , please use the original package or equivalent
grade of material to pack.