COP-USA TBX-DVRWF - Manual (Page 3)

1 Brief Introduction
The software used to realize the central control for all internet video monitor devices
(including:DVS and IP camera) : monitor, data storage, data transfer\manage\control. This version
support 1/4/6/8/9//12/16//20/25/30 display, OSD setting, talkback, record playback, alarm control
and MD, etc. The interface is friendly and easy, can help to control more than one device in same
time. The main functions below:
z Realtime monitor, support CIF/QCIF/Half-D1/D1 format
z Support talkback function
z Support ptz function, allow Pelco D/P and other transparent protocol
z Support alarm /MD/time/ manual trigger record
z Support MD(area/sensitivity optional)/private mask/picture snap
z Support SMTP, send picture to mailbox when alarm
z Support DDNS/PPPoE/DHCP
z Support UPnP,auto configuration port
z Support long distance online upgrade
2 Installation Guide
‹ System requirement
z Operating System: Windows 2000/XP/Vista
z Processor: Intel Pentium III, 1G or Higher (Pentium IV, 2G or Higher
recommended)
z RAM: 256 MB or more
z Color Monitor: At least DirectX 8.1 or higher and 32M Display storage
z HD: More than 40G
‹ Software installation
Run the client software DVS_Client_Setup.exe, the window below will pop up:
1