COP-USA AU40MZ - Manual (Page 11)

11
z press number: “1-128”
z press: CALL
¾ Delete presets CLEAR
z press clear and number
z press PRESET
¾ start up tracking
z press number: “1-6”
z press: SHOT
¾ setup the left point of the line scanning
z press: AUTO
z press: ON
¾ setup the right point of the line scanning
z press: AUTO
z press: OFF
¾ running the line scanning
z Press Number
z Press AUTO
Explain: some protocols do not need to setup the line scanning, just run the line
scanning directly. After running, if the dome or Pan/Tilt is out of control,
probably the protocol adopted doses not support line scanning
¾ Replay self-study
z Press: number
z Press: PATTERN
¾ Record self-study
z Press PATTERN and Number
z Press ON
¾ Stop record self-study
z Press PATTERN and Number
z Press OFF
¾ Open keyboard menu
z Press MENU
¾ Open dome or P/T menu
z Press for 2 seconds MENU
¾ Video input select
z Press 1-4