COP-USA CD59NV-IR35YK - Manual (Page 47)

46
AUTO SCAN
The dome supports 8 groups of auto scan. Please check the
following steps to set up a scan.
1) SCAN NO.: Move the cursor here and press IRIS OPEN to
enter the setup of SCAN Number. Move the joystick to
select a preset number (1‐8) and press IRIS OPEN to
confirm.
2) TITLE: Move the cursor here and press IRIS OPEN to enter
the setup of SCAN Title. Check the detailed above in DOME
TITLE settings.
3) <LEFT LIMIT>: Move the cursor here and press IRIS OPEN
to enter. Move the dome to a defined position as left limit
and press IRIS OPEN to save this left boundary.
4) <RIGHT LIMIT>: Move the cursor here and press IRIS OPEN
to enter. Move the dome to a defined position as right limit
and press IRIS OPEN to save this right boundary.
5) START: Move the cursor here and press IRIS OPEN to start
the current scan.
6) SCAN SPEED: Move the cursor here and press IRIS OPEN to
set up the scan speed ranging 1‐30.