COP-USA PDR26M - Manual

USER MANUAL & NOTES
PC REQUIREMENTS
NOTES
BUTTON AND CONNECTOR
6 7
4 5
2 3
1
CONTENT
USER MANUAL
Please read this user manual in detail before using the product.
NOTES
1. We have tried our best to make sure no mistakes or information was missing while
making this manual.
2. Manufacture warranty period is 1 year. Our Company assumes no responsibility for any
consequencesthat may arise while using and/or installing this products. We cannot be liable
for direct or indirect loss of data including, but not limited to, deleting, wrong operation,
wrong repair etc.
3. Should there be revision or update of software, hardware and manual, we will not issue any
notice. Please feel free to contact original place of purchase to check for updates.
Notice: the difference of display memory and real memory is because of occupied by the
player software.
PC Requirements
NOTES
PRODUCT INTRODUCTION
BUTTON AND CONNECTOR
OPERATION DETAILS
TROUBLE SHOOTING
SPECIFICATION & ACCESSORIES 12
-----------------------------------------------------------------------------3
-----------------------------------------------------------------------------------------4
---------------------------------------------------------------5
---------------------------------------------------------------6
-----------------------------------------------------------------------7
-----------------------------------------------------------------------11
-------------------------------------------------------
1. PC’s minimum system requirement
WIN98 II/ME/2000/XP, IBM compatible private Computer or notebook.
Pentium 200MHz or above.
USB port.
32MB memory (128MB for WIN2000) or above.
20MB hard disk space
CD-ROM Drive
Sound card
Available for internet
2.Connect Mp4 player to your PC
Using USB cable (it is supplied in the accessories)
connect USB port terminal from the player to USB
port at PC correctly.
Notice: Please power on the player BEFORE inserting USB cable. Then turn on the player.
Otherwise it will influence the player’s function. Other USB cables then provided
should not be used.
Dear customer, thank you for choosing our product. We sincerely hope our products can
bringhappiness to you. Please read the following instruction carefully before using.
1.Forbid to use in high temperature, high humidity environment, especially in the high
temperature bathrooms .0 degrees Centigrade- 40 degrees Centigrade is the best working
temperature for Mp4.
2.Avoid putting the MP4 where there is direct sunlight.
3.Please power OFF the unit before inserting or pulling out the SD card. Failure to do so will
cause unpredictable damage to Mp4.
4.put it in the place where the children can't touch, avoid contact with sharp object to prevent
serious damage .
5.Please don't dismantle the MP4 without authorization . Please contact with distributor or our
company, if any query.
6.Please don not change the battery or puncture the battery. That will be extremely hazardous
and mayeven explode or cause a fire.
7.To ensure your safety and safety of others, please do not use while driving or operating
machinery.
8.We suggest customer copy of back up the data at all times, to prevent loss of datadue to, but
not limited to, sudden loss of power.
PRODUCT INTRODUCTION
Product introduction
1) Video Record;
2) Video Play: support ASF ( MPEG-4 ), AVI( DIVX XVID ) 3GP, MP4 format;
3) Support Camera IN,AV out;
4) Multiple language( English/Portuguese ) set;
5) Support TF card;
6) Built-in lithium battery;
7) Built-in speaker.
Play/pause/OK
Previous
Next
MENU
VOL+
VOL -
ESC
Earphone
AV OUT
LINE-IN
AV IN
Indicator light
Capture/M
USB
Charger
TF card slot
On/Off
Hand drag
Notice: 1.Please connect the USB into the PC or the charger in charging.
2.When connect with the PC, delete the removable disk safely in the computer, and
then can power on the player to use in charging state.
OPERATION DETAILS
1.Power on/off operation
Press Power On button for 3secs,then enter the menu stand-by mode of PDR.And press
power on button for 3secs to power it off.
2.Storage medium
if inserted the external storage card,please set TF as current work area in the“Memory”of
System Setting.The system will default FLASH as current work area.
3.Charge operation
Connect the charger to the power, and connect the port with the PDR charge port. At this
moment, the PDR enter charge state and the power instruction light is red.And it will turn off
after charging full,The charge time is around 5 hours in usual. It is best to charge under the
power off state.
4 Connect PC operation
Power on the PDR player, use USB cable of the accessoryies,connect the big side plug to
the PC's USB port,and connect the small side tothe PDR USB port, then the PDR screenwill
show the connection picture. At this moment, open MY COMPUTER will find two
REMOVABLE DISC. The first one is flash memory disc, the second is TF card memory.
Attention to can't open without TF card.
PORTABLE DIGITAL
RECORDER USER GUIDE
Thank you for purchasing our latest product--PDR. Please read the instructions carefully for
safe usage. We recommend you to keep this instruction manual for future reference.