COP-USA MS1000 - Manual (Page 9)

3. Record Display:
M Record Status:
: Indicates recording is in progress.
N Record Mode:
烉Manual Record 烉Schedule Record
!
!烉Motion Detection Record
烉Alarm Record
O Record Storage Mode Status:
!
烉Continuous Record
! % 烉Remaining Storage Capacity
4 System recording is determined according to the recording priority order (Record Priority:
Manual/ Alarm/ Motion Detection/ Continuous).
5. Different recording modes may have different kinds of setups. Basic setup: video size,
recording frames, video quality, and audio recording. When different recording modes are
triggered, the system starts recording according to the different setup. This kind of design
provides flexibility to ensure efficient recording time and quality. Example: Work hour
from 8:00am to 6:00pm, setup
ˬSchedule Record˭to low video quality with less recording
frames to extend the recording time. And off work hour, setup ˬMotion Detection
Record/ Alarm Record ˭ to enable high video quality with the highest recording frames,
when an event occurs.
7/!Video or audio may be recorded into the SD card (SD card is purchased separately). !
Do not withdraw the SD card while recording. It may destroy the data stored within the SD card..
Power loss during recording results incomplete videos or errors.
Video loss during recording, the system stops recording, backups the files, and when
the videos are normal again, the system will continue recording.
7