Motion detection record, 3 motion detection record – COP-USA NVMS 1000 User Manual
Page 33
Advertising
30
NVMS-1000 User Manual
6.3 Motion Detection Record
In the control panel, click “Area & Camera Settings” under
Device to enter the interface.
Select a camera and click ‖Set Motion Alarm ” under
Motion Detection Alarm Settings as shown on the right
figure.
Enable Alarm of device and set the relevant trigger.
Click ‖System Trigger ” under Motion Detection Alarm
Settings as shown on the right figure.
Click
button to select channel. The
selected channel whose motion detection alarm is triggered
will be recorded automatically.
Advertising