Cabletron Systems 2H23-50R - Manual (Page 125)

Port Level Security Configuration Screen
2H23-50R/2H33-37R User’s Guide 5-75
5.21 PORT LEVEL SECURITY CONFIGURATION
SCREEN
The Port Level Security Configuration screen, Figure 5-28 , functions
similarly to the Device Level Security Configuration screen, except that it
is used to set the security of each port of a selected connector.
To access the Port Level Security Configuration screen, use the arrow
keys to highlight the PORT LEVEL SECURITY CONFIGURATION
menu item on the Repeater Configuration Menu screen and press ENTER.
The Port Level Security Configuration screen displays.
Figure 5-28 Port Level Security Configuration Screen
2H23-50R LOCAL MANAGEMENT
Port Level Security Configuration
Device Type: 2H23-50R Firmware Revision: XX.XX.XX
Slot Number: X BOOTPROM Revision: XX.XX.XX
Po rt Network Security State Action On Intruder Address
1 1 [LockOnNext] [DisablePort] [SendTrap]
2 2 [NonSecure] [00-00-00-00-00-00]
3 1 [LockedOnAddr] [DisablePort] [SendTrap] [xx.xx.xx.xx.xx.xx]
4 2 [NonSecure] [00-00-00-00-00-00]
5 2 [NonSecure] [00-00-00-00-00-00]
6 2 [NonSecure] [00-00-00-00-00-00]
7 2 [NonSecure] [00-00-00-00-00-00]
8 2 [NonSecure] [00-00-00-00-00-00]
9 2 [NonSecure] [00-00-00-00-00-00]
10 2 [NonSecure] [00-00-00-00-00-00]
11 2 [NonSecure] [00-00-00-00-00-00]
12 2 [NonSecure] [00-00-00-00-00-00]
SAVE CONNECTOR #: [1] EXIT RETURN
Event Message Line
2286_113