Cabletron Systems 2H23-50R - Manual (Page 95)

System Resources Screen
2H23-50R/2H33-37R User’s Guide 5-45
REPEATER CONFIGURATION MENU
The Repeater Configuration Menu screen enables the user to select the
Repeater Port Configuration screen, which provides access to the security
screens: Repeater Port Configuration, Device Level Security
Configuration, and Port Level Security Configuration. For details refer to
Section 5.18 .
5.12 SYSTEM RESOURCES SCREEN
The System Resources screen, Figure 5-19 , provides information
concerning the processor used in the 2H23-50R or 2H33-37R and the
amount of FLASH memory, DRAM, and NVRAM that is installed and
how much of that memory is available. This screen also allows the user to
monitor the current processor (switch) utilization and the peak switch
utilization.
To access the System Resources screen from the Device Specific
Configuration Menu screen, use the arrow keys to highlight the SYSTEM
RESOURCES menu item and press ENTER. The System Resources
screen displays.
Figure 5-19 System Resources Screen
Firmware Revision: XX.XX.XX
System Resources
22861-23
Device Type: 2H23-50R
BOOTPROM Revision: XX.XX.XX
Flash Memory Installed: 4 MB
DRAM Installed: 20 MB
NVRAM Installed: XX KB
Available: XXXXX Bytes
Available: XXXXX Bytes
Available: XXXXX Bytes
CPU Type: i960 HT 75 Mhz
Current Switch Utilization: 66%
Peak Switch Utilization: 75%
Reset Peak Switch Utilization: [NO]
2H23-50R LOCAL MANAGEMENT
Event Message Line
SAVE
RETURN
RETURN EXIT