COP-USA DVRC264-16ME-A - Manual (Page 54)

DVR User Manual
48
Disconnect: Disconnect the online users to access DVR. If this function is used by the admin, the particular PC will not be able
to access the device for five minutes. .
6.1.6 Record Information
In this tab, a user can check resolution, ftp and record status including sensor based recording, motion based recording,
manual recording or schedule recording.
6.2 Manual Alarm
In this tab, user can trigger a manual alarm.
6.3 Disk Management
1. Format the disk
Step1: Enter into disk management tab.
Note: please format the hard disk before recording. If not formatted, it will show the status of the disk-free space, and total
space at the bottom of screen.
Step2: Click Refresh button to refresh the disk information in the list box;
Step3: Select a hard disk and click Format button to start format.
Note: All recorded files in the hard disk will be lost once it is formatted.
2.
Advanced
User may check model, S/N, firmware, health status of the disk in this interface. User also can monitor the temperature, internal
circuit, dielectric material of the disk, analysis the potential problems of the disk and warn so as to protect its data.