COP-USA Panda DVR - Manual (Page 9)

8
3. Record Display:
Record Status:
: Indicates recording is in progress.
Record Mode:
Manual Record Schedule Record
Motion Detection Record Alarm Record
Record Storage Mode Status:
Continuous Record
% Remaining Storage Capacity
4 System recording is determined according to the recording priority order (Record Priority:
Manual/ Alarm/ Motion Detection/ Continuous).
5. Different recording modes may have different kinds of setups. Basic setup: video size,
recording frames, video quality, and audio recording. When different recording modes are
triggered, the system starts recording according to the different setup. This kind of design
provides flexibility to ensure efficient recording time and quality. Example: Work hour
from 8:00am to 6:00pm, setup Schedule Record to low video quality with less recording
frames to extend the recording time. And off work hour, setup
Motion Detection
Record/ Alarm Record to enable high video quality with the highest recording frames,
when an event occurs.
6. Video or audio may be recorded into the SD card (SD card is purchased separately).
Do not withdraw the SD card while recording. It may destroy the data stored within the SD card.
Power loss during recording can result in incomplete videos or errors.
I f video i s lost during recording, the system w i l l stop recording, backup the files, and
will continue recording only after video signal is restored.