COP-USA PDR25M - Manual (Page 3)

3
Power mode
1) Push the volume - or + button to change to never, 30, 60 or 180 seconds.
2) Push the play/pause to confirm.
For power saving mode select the option 30, 60 or 180 seconds. If no button is pushed during the
selected period, then the DVR will go into standby mode. The blue LED indicators will be flashing
during standby mode. Push the play/pause button to activate the DVR again.
Push the rewind button to select the memory menu. Push the play/pause button to enter.
Memory
1) Push the rewind f or backward button to select the internal "flash" or external "SD" memory.
2) Push the play/pause button to confirm the use of the flash or SD memory. Push again after the
dialog box is displayed.
3) Push the volume - or + button to select work space or format. Work space will show an
overview of the capacity of the memory, used and unused. With format it is possible to erase data
if the memory is full.
4) If the option format is selected, push the play/pause button. A dialog box is displayed. Push the
volume - or + button to select OK or cancel. Push the play/pause button to confirm.
5) Push the ESC button to exit the memory menu.
6) Push ESC to exit the "System Setup" menu.
Push the forward button to select the audio menu.
Audio:
Push the play/pause button to enter the "Audio Explorer".
1) Push the play/pause button to start the music.
2) Push the forward or rewind button to select the desired music tracks.
3) Push the volume - or + button to set the volume level.
4) Push ESC to exit the audio explorer.
Note: connect the DVR to your PC with the supplied USB cable for downloading music to the
DVR.
Push the forward button to select the video menu.
Video:
Push the play/pause button to enter the video player.
1) Push the play/pause button to start the video player.
2) Push the forward or rewind button to select the desired video files.
3) Push the volume - or + button to set the volume level.
4) Push ESC to exit the video player.
Mode button
1) Push the mode button for 2 seconds to enter additional functions.
2) Push the volume - or + button to select a function.
3) Push the play/pause button to enter the function.
4) Push the volume - or + button to select an option.
5) Push the play/pause button to confirm.
6) Push ESC to exit the mode function
Note:
1) For AV output select PAL (Europe) in the TV Output functions.
2) Connect the DVR to your PC with the supplied USB cable for uploading video files to your PC.