Cobalt Networks Co11 - Manual (Page 2)

Cobalt ™ Co
11
Condenser Vocal Microphone
Specifications
Element Self-Biased Condenser
Frequency Response 50 Hz to 20 kHz
Polar Pattern Cardioid
Impedance Low-Z balanced (250 Ohms)
Sensitivity
Open Circuit Voltage 4.0 mV/PA (-48 dBV) re 1 Pa*
Microphone Connector 3-pin, XLR-type
Polarity Pin 2 positive, referenced to pin 3
with positive pressure on diaphragm
Finish/Materials
Dimensions
Length 6.8 in. (173 mm)
Diameter 2.1 in. (53 mm)
Shank .80 in. (20 mm)
Weight, Net
Accessories included Stand adaptor (black) and Gig bag
Maximum SPL, 1 KHz
Clipping Level, 1KHz -3 dBV
130 dB SPL (1% THD)
Self-Noise
Dynamic Range, (Maximum SPL
to A Weighted noise level)
26 dBA
113 dB
10.3 oz. (292 grams)
Power
positive at pins 2 & 3, Current Drain: Up to 10 mA
Phantom Supply Requirement: 24 to 48 Vdc,
Durable Polyurethane painted, die cast zinc
Signal-to-Noise Ratio 68 dB (@ 94 dB SPL)
12000 Portland Avenue South, Burnsville, MN 55337
Phone: 952/884-4051, Fax: 952/884-0043
www.electrovoice.com
© Telex Communications, Inc. 9/2003
Part Number 38110-129 Rev. B
U.S.A. and Canada only. For customer orders, contact Customer Service at:
800/392-3497 Fax: 800/955-6831
Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:
+ 49 9421-706 0 Fax: + 49 9421-706 265
Other International locations. For customer orders, contact Customer Service at:
+ 1 952 884-4051 Fax: + 1 952 736-4212
For warranty repair or service information, contact the Service Repair department at:
800/553-5992 or 402/467-5321
For technical assistance, contact Technical Support at:
800/392-3497 or 952/736-4656
Specifications subject to change without notice.