Troubleshooting – Cambridge Audio LK10 User Manual
Page 18
18
Troubleshooting
If the LK10 becomes locked and/or ‘ERROR’ appears on the display due to a power
interuption or during cloning, follow these steps:
1. Unplug the power to the system and plug back in after one minute.
2. When the power resumes, the LK10 will display distorted text.
3. Clone the LR10 to the LK10 without entering Learn mode.
4. When the LR10 has finished sending, repeat Step 1.
Note: Time and date will not be updated in the LK10.
Visit www.cambridge-audio.com and register to receive notification of future hardware and software
releases.
This guide is designed to make installing and using this product as easy as possible. Information in this
document has been carefully checked for accuracy at the time of printing; however, Cambridge Audio's
policy is one of continuous improvement, therefore design and specifications are subject to change
without prior notice. If you notice any errors please feel free to email us at: [email protected]
This document contains proprietary information protected by copyright. All rights are reserved. No part of
this manual may be reproduced by any mechanical, electronic or other means, in any form, without prior
written permission of the manufacturer. All trademarks and registered trademarks are the property of
their respective owners.
Incognito and Incognito Ready are trademarks of Cambridge Audio Ltd. All rights reserved.
© Copyright Cambridge Audio Ltd 2007
A-BUS and A-BUS Ready are registered trademarks of LeisureTech Electronics Pty Ltd Australia.