Cub Cadet RZT42 - Manual (Page 6)

6
SAFETY DECALS AND LABELS
Keep product safety graphics (decals) clean. Replace any safety graphic that is damaged, destroyed, missing, paint-
ed over or can no longer be read. Replacement safety graphics are available through your dealer.
GENERAL OPERATING INSTRUCTIONS
– LOCATED ON RIGHT CONSOLE
ASIDE OPERATOR’S SEAT
CUTTING
HEIGHT
• PTO Automatically Disengages When Both Lap
Bars Are Moved Too Far Into Reverse.
• PTO Automatically Reengages When Levers Are
Returned To The Neutral Or Forward Positions.
NOTICE
START
NEUTRAL
FORWARD REVERSE
FOR FIRST-TIME OPERATORS
• Start Off In A Flat, Open Area.
• Keep Bystanders Away.
• Set Throttle At A Low Speed.
• Practice Maneuvering, (Forward, Reverse,
Left, Right) Without Deck Engaged.
STARTING INSTRUCTIONS
• To START, PARK BRAKE must be set.
• P.T.O. switch in OFF (down) position.
• Lap bars in NEUTRAL and outward positions.
• Throttle set properly, CHOKE position if "cold".
• Turn key to ON, then START, release when engine runs.
START
NEUTRAL
FORWARD REVERSE
ON
OFF
PARK
BRAKE
P
FAST
SLOW
CHOKE
GENERAL SAFETY INSTRUCTIONS
– LOCATED ON LEFT CONSOLE
ASIDE OPERATOR’S SEAT
DECK HEIGHT INDICATOR
– LOCATED ON RIGHT SIDE
OF SEAT BOX FRAME
THROTTLE CONTROL
INDICATOR – LOCATED ON
LEFT CONSOLE
PARK BRAKE INDICATOR
– LOCATED ON LEFT SIDE
OF SEAT BOX FRAME