Canon D1 - Manual (Page 21)

3-2 Error Messages
Error Messages
When an error occurs and the machine does not work properly, “SERVICE CALL ERROR”
appears on the LCD of the host machine (printer). If “SERVICE CALL ERROR” appears, perform
as follows:
Service Call Error
When the SERVICE CALL ERROR appears on the LCD of the host machine, turn off the power
switch of the saddle stitcher and the printer. Wait about 10 seconds, and then turn on the power
switch again. If the SERVICE CALL ERROR is still shown on the LCD of the host machine, check
the following items, turn off the main power, and disconnect the power plug of the booklet trim-
mer-D1. Then contact your local authorized dealer.
- Product Name
- State of trouble
- Code number indicated on the touch panel display of the host machine (printer)
Do not plug in or pull out the power plug with wet
hands. It may cause an electrical shock.
When you pull the power plug out, be sure to hold
the plug as you do so. If you pull it out by the power
cable, it may expose or cut the core wires and
cause a leak of electricity, which may result in fire or
electrical shock.
WARNING
CAUTION