Troubleshooting, Warning – Cub Cadet ZT-3400 User Manual

Page 10

Advertising
background image

8

ZT-2800

®

/ZT-3100™/ZT-3400™

TrOUBLesHOOTing

In many cases, problems with a transaxle are

not related to a defective transaxle, but are

caused by slipping drive belts, partially engaged

bypass valves, and loose or damaged control

linkages. Be sure to perform all operational

checks and adjustments outlined in Service and

Maintenance, before assuming the transaxle

is malfunctioning. The table below provides a

troubleshooting checklist to help determine the

cause of operational problems.

warning

do not attempt any servicing or ad-

justments with the engine running.

Use extreme caution while inspecting

the drive belt assembly and all vehicle

linkage!
follow all safety procedures outlined in

the vehicle owner’s manual.

TroubleshooTing CheCklisT

Possible Cause

Cor rective Action

unit operates in one Direction only

Control linkage bent or out of adjustment

Repair or replace linkage, Page 9

Drive belt slipping or pulley damaged

Repair or replace drive belt or pulley, Page 9

Vehicle Does not Drive/Track straight

Vehicle tires improperly inflated

Refer to vehicle manufacturer suggested pressure

Control linkage bent or out of adjustment

Repair or replace linkage, Pages 9 and 13

Bypass assembly sticking

Repair or replace bypass, Page 29

Brake Partially Engaged

Disengage Brake, Replace Broken or Missing Brake Return Spring

unit is noisy

Oil level low or contaminated oil

Fill to proper level or change oil, Page 11

Excessive loading

Reduce vehicle loading, Page 9

Loose parts

Repair or replace loose parts

Bypass assembly sticking

Repair or replace linkage, Page 9

Air trapped in hydraulic system

Purge hydraulic system, Page 12

Brake Partially Engaged

Disengage Brake, Replace Broken or Missing Brake Return Spring

unit has no/low Power

Engine speed low

Adjust to correct setting

Control linkage bent or out of adjustment

Repair or replace linkage, Page 9

Drive belt slipping or pulley damaged

Repair or replace drive belt or pulley, Page 9

Oil level low or contaminated oil

Fill to proper level or change oil, Page 11

Excessive loading

Reduce vehicle loading, Page 9

Bypass assembly sticking

Repair or replace linkage, Page 9

Air trapped in hydraulic system

Purge hydraulic system, Page 12

Brake Partially Engaged

Disengage Brake, Replace Broken or Missing Brake Return Spring

unit is operating hot

Debris buildup around transaxle

Clean off debris, Page 20

Cooling fan damaged

Repair or replace cooling fan, Pages 22-24

Oil level low or contaminated oil

Fill to proper level or change oil, Page 11

Excessive loading

Reduce vehicle loading, Page 9

Air trapped in hydraulic system

Purge hydraulic system, Page 12

Brake Partially Engaged

Disengage Brake, Replace Broken or Missing Brake Return Spring

Transaxle leaks oil

Damaged seals, housing, or gaskets

Replace damaged components

Air trapped in hydraulic system

Purge hydraulic system, Page 12

Advertising
This manual is related to the following products: