Doepfer Pocket Control/Pocket Fader (device no longer available) - Manual (Page 7)

pocketControl Owners Manual pocketControl Owners Manual Page 7
List of presets 1 ~ 64
Switch Pos. Preset Description MIDI
8765 4321 Number Channel
0000 0000 Preset 0 Volume (control 7) Channels 1 - 16
0000 0001 Preset 1 Pan (control 10) Channels 1 - 16
0000 0010 Preset 2 Filter Cutoff (control 74) Channels 1 - 16
0000 0011 Preset 3 Resonance (control 71) Channels 1 - 16
0000 0100 Preset 4 Volume (control 7) /Pan (control 10) Channels 1 - 8
0000 0101 Preset 5 Volume (control 7) /Pan (control 10) Channels 9 - 16
0000 0110 Preset 6 Filter Cutoff (control 74) /Resonance (control 71) Channels 1 - 8
0000 0111 Preset 7 Filter Cutoff (control 74) /Resonance (control 71) Channels 9 - 16
0000 1000 Preset 8 Control 0 - 15 Masterchannel
0000 1001 Preset 9 Control 16 - 31 Masterchannel
0000 1010 Preset 10 Control 32 - 47 Masterchannel
0000 1011 Preset 11 Control 48 - 63 Masterchannel
0000 1100 Preset 12 Control 64 - 79 Masterchannel
0000 1101 Preset 13 Control 80 - 95 Masterchannel
0000 1110 Preset 14 Control 96 - 111 Masterchannel
0000 1111 Preset 15 Control 112 - 127 Masterchannel
0001 0000 Preset 16 GS/XG General controls Masterchannel
0001 0001 Preset 17 AWE/SB 1 (Filter, LFO2, ENV1) Masterchannel
0001 0010 Preset 18 AWE/SB 2 (LFO1, ENV 1) Masterchannel
0001 0011 Preset 19 AWE/SB 3 (LFO2, ENV 2) Masterchannel
0001 0100 Preset 20 AWE/SB 4 (Tuning, Modulation) Masterchannel
0001 0101 Preset 21 AWE/SB 5 (Filter, Effects, Portamento, Aftertouch) Masterchannel
0001 0110 Preset 22 GS/XG Drum Pitch Masterchannel
0001 0111 Preset 23 GS/XG Drum Level Masterchannel
0001 1000 Preset 24 GS/XG Drum Pan Masterchannel
0001 1001 Preset 25 GS/XG Drum Reverb Levels Masterchannel
0001 1010 Preset 26 GS/XG Drum Chorus Levels Masterchannel
0001 1011 Preset 27 GS/XG Drum Delay/Variation Levels Masterchannel
0001 1100 Preset 28 XG Drum Filter Cutoff Masterchannel
0001 1101 Preset 29 XG Drum Filter Resonance Masterchannel
0001 1110 Preset 30 XG Drum Envelope Attack Masterchannel
0001 1111 Preset 31 XG Drum Envelope Decay Masterchannel
0010 0000 Preset 32 XG Multi-Part Level Channels 1 - 16
0010 0001 Preset 33 XG Multi-Part Pan Channels 1 - 16
0010 0010 Preset 34 XG Multi-Part Reverb Send Channels 1 - 16
0010 0011 Preset 35 XG Multi-Part Chorus Send Channels 1 - 16
0010 0100 Preset 36 XG Multi-Part Dry Level Channels 1 - 16
0010 0101 Preset 37 XG Multi-Part Variation Level Channels 1 - 16
0010 0110 Preset 38 XG Low EQ Gain Channels 1 - 16
0010 0111 Preset 39 XG Low EQ Frequency Channels 1 - 16
0010 1000 Preset 40 XG High EQ Gain Channels 1 - 16
Page 18
Preset 64 Yamaha 01V [Control] (Master Channel)
Knob 1 Stereo In Level Controller 16
Knob 2 Stereo Out Level Controller 21
Knob 3 Stereo Out Balance Controller 67
Knob 4 Stereo Out 2 Cue Controller 82
Knob 5 Stereo In to Cue Controller 75
Knob 6 Send 4 Level Controller 20
Knob 7 Send 3 Level Controller 19
Knob 8 Internal FX 1 Type Controller 20 (?)
Knob 9 Send 3 to Cue Controller 80
Knob 10 Send 4 to Cue Controller 81
Knob 11 Send 3/4 Balance Controller 66
Knob 12 FX Return 1 Level Controller 17
Knob 13 FX Return 2 Level Controller 18
Knob 14 FX Return 1 to Cue Controller 78
Knob 15 FX Return 2 to Cue Controller 79
Knob 16 Internal FX 2 Type Controller 21 (?)
Presets 65 ~ 128 are undefined, though as new presets are created, they can be loaded into the pocketC by a Sys-Ex
MIDI file. The enclosed disk includes new presets, with details in the README.TXT file .
Troubleshooting
There will be times when the pocketC does not seem to be working as expected, before suspecting
a faulty pocketC, the checklist below should help resolve the problem.
• Is the pocketC powered up correctly? There is no actual power indicator on the pocketC,
but the LED is always active. Moving a knob will flash the LED (the LED does not flash if the
knob has not been assigned a function), or briefly pressing the Snapshot switch will cause the
LED to flash for around a second as the pocketC resets.
• Is the pocketC set to the correct preset? Maybe one of the dip switches has moved
accidentally or a MIDI program change has set a new preset up. Check the dip switch settings.
• Is the pocketC set to the correct MIDI channel? Many presets make use of the Master
Channel, there is no way of checking what the Master Channel is set to (other than monitoring
the transmitted data), so the best procedure here is to set the Master Channel again to double
check it is correct. Hold the Snapshot switch down for at least a second, and whilst keeping it
down move the relevant knob that corresponds to the required MIDI channel. Make sure you
do not move another knob after this before releasing the Snapshot switch, as it is the last knob
moved that sets the Master Channel.
• Problems with Sys-Ex transfers? Remember that the pocketC always merges it’s own data
with MIDI input data, this can cause a MIDI loop when receiving Sys-Ex, therefore you may
find it best to disconnect the MIDI out of the pocketC when sending it Sys-Ex messages, or at
least make sure the transmitting device is not MIDI thru enabled.
• You cannot get the pocketC to make the Coffee. Er ... no, the pocketC actually cannot
do this unless you have a MIDI controlled kettle...