Crestron electronic Isys TPS-3100L - Manual (Page 17)

ISYS ® WALL MOUNT TOUCHPANELS
Isys ® 10.4" Wall Mount Touchpanel
TPS-4000L
Isys ® Wall Mount Touchpanels
SPECIFICATIONS
Touchscreen Display
Display Type: TFT Active matrix color LCD
Size: 10.4 inch (26.4 cm) diagonal
Aspect Ratio: 4:3 VGA
Resolution: 640 x 480 pixels
Brightness: 450 nits (cd/m
2 )
Contrast: 600:1
Color Depth: 18-bit, 256k colors
Illumination: Edgelit fluorescent
Viewing Angle: ±70° horizontal, +45°/-55° vertical
Touchscreen: Resistive membrane
Buttons
(5) Replaceable engravable buttons with red feedback
LEDs, programmable
Light Sensor
Programmable photosensor for automatic backlight dimming
Processor
CPU: 32-bit Freescale ColdFire ® Microprocessor
w
a
ll mount touchpanels
Memory
DRAM: 8 MB
Flash: 8 MB
Maximum Project Size: 7 MB
Graphic Engine
Isys engine, 16-bit non-palette graphics; 65,536 colors; Synapse
image rendering algorithm; multi-mode objects, color key
video windowing
Video
Signal Types: Auto-detecting composite/S-Video
Formats: NTSC 480i or PAL 576i
Color Depth: 18-bit; 262,144 colors
Features: Single-window scalable to full-screen, time base
correction, gamma correction
Audio
Hardware Features: Built-in microphone with defeatable AGC,
built-in amplified speakers, internal volume control and audio mixer
Audio Feedback (WAV): 8-bit PCM, mono, 8 kHz sampling rate
Amplification: 5 Watts X2 channels for built-in speakers (mono)
Connectors
RS-232: (1) 6-pin RJ11 female
Serial connection to PC for loading screen files
Touchscreen output to PC or Telestrator
Bidirectional RS-232 up to 115.2k baud
Hardware and software handshaking support
NET: (1) 4-pin 3.5mm detachable terminal block
Connects to Cresnet control network
MIC OUT: (1) 3-pin 3.5mm detachable terminal block
Balanced/unbalanced stereo line-level output
Output Impedance: 600 ohms balanced, 300 ohms unbalanced
Maximum Output Level: 2 V
RMS
balanced, 1 V
RMS
unbalanced
AUDIO INPUT: (1) 6-pin 3.5mm detachable terminal block
Balanced/unbalanced stereo line-level input
Input Impedance: 20k ohms balanced, 10k ohms unbalanced
Maximum Input Level: 4 V
RMS
balanced, 2 V
RMS
unbalanced
NTSC/PAL INPUT (Balanced): (1) 6-pin 3.5mm detachable
terminal block, composite or S-Video input, balanced
Input Impedance: 100 ohms
Connects to any Crestron CAT5 balanced video source
NTSC/PAL INPUT (Coaxial): (2) 2-pin 3.5mm detachable terminal
blocks, composite or S-Video input
Input Impedance: 75 ohms
Power Requirements
Cresnet Power Usage: 22 Watts (0.92 Amp @ 24 Volts DC)
> continued
www.crestron.com | 800.237.2041 | 201.767.3400
© 2007 Specifications subject to change without notice
75
TPS-4000L using conventional AV sources