Doepfer A-180 1x8/2x4 Multiple User Manual
System a - 100, A-180, Introduction
Advertising
doepfer
System A - 100
MULTIPLES
A-180
1
1. Introduction
Module A-180 (MULTIPLES) is a multi-connector.
It has eight inter-connected sockets, so that you can
patch more inputs or outputs into any module.
The sockets can be split into two groups of four by
disconnecting an internal solder bridge.
Modification from Dezember 2003: The module is
shipped in the dual quad version (two groups with 4
connected sockets each, no solder bridge). To obtain
a 8-fold multiple the solder bridge has to be installed.
The modification was made as normally two quad
multiples are more often needed that a 8-fold multiple.
A-180
MULTIPLES
Lötbrücke
solder bridge
Advertising