EKLIPES EKLIPE 2000 Amp EZ Jump-Start 12 Volt Battery Harness - Manual (Page 3)

Step 1)
After you checked all the wire on the BMW Plug as mentioned above you are now ready to Connect the Red and
Black Eyelets on the Battery Harness Directly to the Positive (+) and Negative (-) Battery Poles on your Battery.
Remember! DO NOT PULL ON PLUGS DURING INSTALLATION!
The 15 Amp Fuse link on the SAE Plug side of this Harness is a Protective Breaker to protect your Cell Phone and
any other electronics you may be charging with our EKLIPES™ Cell Phone and GPS Charging Products