Canon EOS Rebel XT - Manual (Page 20)

20
For details on the battery, refer to the instructions for Battery Pack NB-2LH.
1 Remove the cover.
2 Attach the battery.
¡ Align the battery’s front edge with the
battery charger’s index line. While
pressing down the battery, slide it in
the direction of the arrow.
¡ To detach the battery, follow the
above procedure in reverse.
3 For CB-2LW
Flip out the prongs and recharge
the battery.
¡ As shown by the arrow, flip out the
battery charger’s prongs.
¡ Insert the prongs into a power outlet.
For CB-2LWE
Connect the power cord and
recharge the battery.
¡ Connect the power cord to the charger
and insert the plug into the power outlet.
s Recharging starts automatically and
the recharge lamp turns orange.
s When the battery is fully recharged,
the recharge lamp will turn green.
¡ It takes about 90 minutes to fully
recharge a completely exhausted
battery.
Recharging the Battery
Battery pack slot index
CB-2LW
CB-2LWE