Elektron C6 - Manual (Page 3)

FUNCTION OF THE MAIN PROGRAM WINDOW
DATA BROWSER
Lists all loaded files and the received data. Filename, length and type is listed. Select an
item to get additional info in the File Info field. The items in the data browser can be
rearranged. Drag and drop to the data browser is supported.
FILE INFO
Shows additional info about files and received data. For Elektron SysEx dumps a brief
description of the contents is displayed. For audio files the basic parameters are listed.
• [Loop] For audio files the looping behavior is controlled when sending them as a MIDI
SDS. Loop:File honors the looping information stored in the file. Loop On forces looping
behavior. Loop Off selects no looping.
• [Stereo] Selection for stereo audio files what to send as MIDI SDS, as a MIDI SDS
transfer is always mono, or when converting a loop to DigiPRO format. L + R sends a mix
of the two channels. Left or Right sends the selected channel only.
• [DigiPRO] Converts WAVE or AIFF samples either using the full sample or, if present, the
sample loop points to Monomachine DigiPRO waveform format. The maximum allowed
length of the loop is 16384 samples.
GLOBAL
• Sample position. Enter the sample position you want the MIDI SDS file to contain when
sending an audio file. Automatically updated for each sent file to allow for easy transfer of
multiple files.
• Turbo button. Press this button and if the MIDI interface is an Elektron Turbo charged
MIDI interface, connected to a turbo charge enabled device, a turbo speed connection is
established.
STATUS ROW
• Progress bar. Shows the progress of each sent file.
• Sending text. Displays Sending when sending is in progress.
• Receiving text. Displays the number of received data bytes.
C6 SysEx Tool User´s Manual 3