Elektron Monomachine - Manual (Page 5)

+DRIVE STRUCTURE AND FUNCTIONALITY
3
+DRIVE SETTINGS
Here you select how quick loading a new Snapshot will affect the data of the Snapshot cur-
rently stored in the Battery Backed Memory. In this menu you can also format your +Drive.
QUICK MODE decides the behavior of the QUICK MODE menu. The setting is truly global
and will not be changed when changing Snapshots. The QUICK MODE menu allows you to
load Snapshots efficiently. Access the QUICK MODE menu by holding down [FUNCTION]
while pressing the [KIT/SONG] key. First the GLOBAL menu will be accessed, but after a
short while the QUICK MODE menu will appear.
CHANGE will save all pattern, kit, song and global data of the Battery Backed Memory to
the Snapshot +Drive location it was loaded from before a new Snapshot is loaded. If this
option is chosen, the QUICK MODE menu will be titled CHANGE SNAPSHOT.
LOAD means that all pattern, kit, song and global data of the Snapshot loaded to the Bat-
tery Backed Memory will be overwritten when a new Snapshot is loaded. If this option is
chosen, the QUICK MODE menu will be titled LOAD SNAPSHOT.
FORMAT DRIVE makes it possible to erase everything on the +Drive. If you want to format
the +Drive press [ENTER/YES] key. A prompt will appear. Press [ENTER/YES] to format
the +Drive. Press [EXIT/NO] to cancel the operation.
• Note that formatting the +Drive will not erase the Snapshot loaded in the Battery
Backed Memory. However, any user waveforms in the Digibank loaded in the DSP
will be cleared immediately and replaced with factory waveforms.