Sensors pre-mapping – Eowave Eobody3 User Manual
Page 12
Sensors pre-mapping
All Eowave sensors are ready to use with Eobody3 Sensorboxes. They have been designed to get
the best signal response with additionnal filters and amplifying circuitry. They are calibrated for
maximum bandwidth. Many are plug&play and do not need extra processing. The following table is
for Eowave sensors only. More information on each sensor can be found in the sensors datasheet
available on www.eowave.com
Sensor type
Number
of inputs
Continuous/
on/off
Active
/passive
Need
ext.
power
Integratedad
ditionnal
circuitry
Editor parameters setting
2D GForce
2
0-127
active
no
yes
Plug&play
3D GForce
3
0-127
active
no
yes
Plug&play
IR
1
0-127
active
yes
yes
- the output signal can be amplified
by setting the analogue zoom on 1
- To reduce IR noise, filter the
signal in the editor by setting a
high filter value.
Light
1
0-127
passive
no
yes
Plug&play
movement
1
On/off
passive
no
yes
Plug&play
detection
1
On/off
active
yes
A gate value of 11 will reduce noise
to avoid uncontrolled triggering.
flexion
1
0-127
passive
no
Yes
External
trimmer
Plug&play. Sensitivity can be set
with the external trimmer.
footswitch
1
On/off
passive
no
yes
Plug&play
A gate value of 11 will reduce noise
to avoid uncontrolled triggering.
joystick
2
0-127
passive
no
yes
- Plug&play
Expression
pedal
1
0-127
passive
no
no
- Plug&play
- Note that you can use the inverse
feature.
- the linear response of a pedal can
be changed to a logarithmic or
exponential response with the
curve parameter.
position
1
0-127
passive
no
yes
Plug&play
pressure
1
0-127
passive
no
yes
Plug&play
potentiometer
1
0-127
passive
no
no
Plug&play
Shock piezzo
1
On/off
passive
no
Yes
amplifier
Use a sensorbox with trigger
inputs, which are sensitive to the
velocity.
A gate value of 11 will reduce noise
to avoid uncontrolled triggering.
switch
1
On/off
passive
no
no
Plug&play
A gate value of 11 reduce will noise
to avoid uncontrolled triggering.
temperature
1
0-127
passive
no
no
Plug&play
ultrasonic
1
0-127
active
yes
yes
Note that when using more than
one, they need to be synchronized.
(Only with digital I/O).
Gyroscope 2
axis
2
0-127
passive
yes
Gyroscope 5
axis
5
0-127
passive
yes
sonometer
1
0-127
passive