Flylink Full HD G-sensor - Manual (Page 4)

Operation
Starting to use the car camcorder
◣Turning ON/OFF
Press power button once to power on ,blue light indicator is on;
Press again to power off, blue light indicator is off.
Attention: Low battery is displayed before shutting down.
◣Changing Batteries
There 3 ways of changing the battery, Red light indicator is on while charging; full
charge time is 180 minutes.
Red light indicator will turn off when fully charged
1. Using the AC adaptor to charge battery
2. Using USB to charge battery
3
.Adopt auto cigarette lighter power supply
◣Placing the Micro SD card
Place the micro SD card into the memory card slot according to the image below;
press it until you hear a click sound.
Insert TF card A, TF Card A video display work
Insert TF card B, Video Display TF Card B work
If insert two TF card, the system will default to card A to recording at first, if card A is
full, it will automatically cycle to Card B
◣G-Sensor Function
Select Off/High/Middle/Low, when the impact dynamics reached the value your setup,
this video will be locked.
◣Basic operation:
◣How to switch between video, photos, playback modes
Press MODE to switch modes
◣How to enter setting mode
Press MENU once, press MENU key again, enter “System Setting” option, a blue
background will be displayed.
Format: Format Micro SD card (this action will delete have not locking data stored in
the Micro SD card)
Language setting: 1) English 2) Traditional Chinese 3) Simplified Chinese 4)
Japanese 5) Russian 6) German,7) French,8) Spanish,9) Italian,10) Portuguese,
Reset System settings:Cancel /Proceed
Frequency:50 Hz/60Hz
Date setup:Set Date/Time
◣How to record video and enter setup
◣Shooting video
Press OK to start recording ,press it again to stop.
◣Video option settings