Clickfree Wireless - Manual (Page 23)

Clickfree Wireless Backup (Windows) Viewing Backed Up Files
Copyright © 2010 Storage Appliance Corporation. 23
A: The minimal amount is every 2 hours which is also the default schedule.
Q: How many PCs or Macs can I use the Clickfree on to back up?
A: Up to 20 PCs or 20 Macs.
Q: When first hooking up the Clickfree to my computer that has Windows Vista or
Windows 7, I get a question about wanting to recognize the device. What should I do?
A: This is a Windows Vista/Windows 7 feature and not prompted by the ClickFree. You
should say yes to recognize the ClickFree Device.
Q: Do I need to setup anything on my home router for the Clickfree Wireless device to
work?
A: No. You just need to make sure that all your computers on the same network and file
sharing is enabled.
Q: Do I have to plug the CLICKFREE WIRELESS device to the router or my Windows and
MAC computer for the backup to work every time?
A: No. You only need to plug it in each Windows or MAC computers at the initial setup to
install wireless functionality. The first backup you take while the CLICKFREE WIRELESS is
directly connected to the computer will install wireless functionality (Backup Link). After
that, the CLICKFREE WIRELESS should be plugged into a wall power socket.
Q:What is the difference between the C2N model and CLICKFREE WIRELESS model?
The C2N model can backup all computers with the device plugged in on one of the
computers within the network. The CLICKFREE WIRELESS model is wireless i.e. it does not
have to be connected to any computer and you just need to plug it in the wall power socket
Q: I have a C2N, can I use CLICKFREE WIRELESS at the same time, e.g. both devices
known to my network and schedule the backup simultaneously?
A:Yes you can use both devices at the same time