Crosley Radio Crosley Full Size Jukebox CR12-10 - Manual (Page 7)

Radio Operation
10 5
Basic Operation
7
FM Stereo:
If the station you are receiving is broadcasting
in stereo you will see “ ” displayed in the left
of the LCD display.
Note: If the station is not broadcasting in Stereo,
You will not see the Symbol “ ” of the LCD
display.
8
AMS ~ Auto Memory Store/ Preset Scan
Features:
To automatically scan through your preset
stations, press the AMS button(13/44) and
hold for less than 2 seconds. This will start the
automatic scan which will search through all of
the preset program positions. Example: If you
are listening to band F 1 ch1, and press AMS
button(13/44) it will search the six positions
on F 1 then skip to F 2 and search all 6
positions then skip to F 3, etc. pausing for a few
seconds on each program. When it reaches a
program (station) that you wish to stop on,
press AMS button(13/44) one more time to
halt the search. Also, if you wish to manually
scroll through the preset programs you can
"double click" the AMS button(13/44) to advance
from one saved station to the next. The AMS
can also search for and save the stations it
finds as preset memory locations. To activate
this feature, select any band mode, FM 1
through AM 2. Then press and hold the AMS
button(13/44) for more than 2 seconds.
The system searches and stores the first six
stations it finds in the preset memory locations
for that selected band, (example, if you selected
F 1 anstarted the search, it stored the stations
found as ch 1 through ch6 in band F 1).
Press BAND(11/32) to advance to the next band
and repeat the search to store 6 more stations.
Continue through all bands to store the maximum
of 30 preset stations.
·
NOTE: When you start the auto search it will
begin from the station you are currently set at.
For example if you are at 101.3 on the FM
frequency, the search will begin there and search
up through the FM frequency range until it finds
the first 6 signals.
The unit has a feature to reinforce the
BASS sound. This feature works especially well
when listening at low volume levels. The LCD
display will indicate "LOUD" when this feature is
active. This feature can only be set by using the
Loud button on the control panel.
9
SCAN:
In radio mode, pressing the SCAN button
(23/36)will start INTRO station, after three
seconds of each will be next station receiver,
if the SCAN button (23/36) is pressed again,
it unit return to normal station mode.
Control Locators
Remote Controls
Jukebox / iPod Function
30) MODE
31) VOLUME UP
32) BAND
33) SELECT
34) BACK SKIP
35) VOLUME DOWN
36) SCAN / MENU
37) MUTE
38) 2(SCN)
39) 1(PAU) / PLAY & PAUSE
40) 4(SHF) / RANDOM
41) 5(CD-) / DOWN ARROW
42) 6(CD+) / UP ARROW
43) 3(RPT) / REPEAT
44) AMS / ENTER
45) FORWARD SKIP
46) EQ
47) POWER
Switch to iPod Remote Function
Once iPod inserted into the docking, iPod will play.
All other functions will stop immediately and the
remote function will change to iPod mode.
BAND EQ
AMS
CD+ CD
MENU ENT
DOWN UP
30
31
32
33
34
35
36
37
38
39
40
41
46
45
47
42
43
44