Hardy Bench Scales - Manual (Page 8)

Chapter 3 - Installation
3-1
CHAPTER 3 - INSTALLATION
Precautions Do not store or operate the scale out of its spec-
ified temperature range. (See Temperature
Ranges in Chapter 2)
Do not store other equipment on the scale when
it is not in use or in storage.
Do not allow a build-up of debris on, around or
under the scale.
Do not set the scale in water or allow water to
settle around the scale. Provide Proper drainage.
Do not allow static or other electrical discharges
through the scale.
Do not try to repair the scale. Contact Hardy
Process Solutions Technical Support Department
for any and all repairs.
Unpacking Hardy Bench scales are shipped fully assembled
and only require adjustment of the overload
stops and adjustment of the leveling feet. If there
is any damage to the shipping container or to the
scale, save all the packaging material and file a
report with the shipper.
Adjusting the
Mechanical Overload
Stops There is a bolt in each corner of the frame that is
fully engaged for shipping protection. Each
should be adjusted to allow the load cell to
deflect to its maximum deflection distance, but
no further.