Canon LCOS Projectors - Manual (Page 10)

10
Convenient Remote Control functions
for sophisticated presentations
Digital Zoom
Enlarges a selected single
area of the screen, such as
specific data in a graph;
images can be enlarged
a maximum of 12x*.
* Resolution of the enlarged section is reduced.
Spot
Highlights a portion of the image on the screen;
the spotlight can be made larger or smaller and
moved anywhere on the screen.
Freeze
Freeze-frame function lets you freeze the
on-screen display for pauses in the presentation,
such as changing PC connections or checking
the subsequent image file.
LED Illumination
LEDs on all REALiS models indicate the projector’s connections and operational
status at a glance. When several image input devices are connected, a LED indicates
which image signal is selected as the input. The LED illumination on the operation
panel flashes to indicate start-up, end of presentation, and other user commands.
LED indicates connector responding
to image signal.
LEDs flash to indicate/confirm
specific operations.
Input terminals Operations panel
➧ Vents designed for efficient cooling
➧ In-line layout for
unobstructed ventilation
➧ Large fan operates at lower
speed
Quiet Operation
In a projector, heat is generated by its projection lamp and power-supply circuits.
The cooling system required to dissipate this heat is one of the main reasons why
projectors tend to be noisy. For all our REALiS models, ventilation vents, cooling fan,
and layout of the optical array have been engineered with noise prevention in
mind, resulting in exceptionally quiet operation.
Guide Functions
All REALiS models display guide
messages in an on-screen
window, providing feedback on
invalid operations and set-up
tips. The same window also
introduces auto set-up and Off
& Go functions when power is
switched on or off.
S X 7 S X 6 S X 6 0 X 7 0 0