Industrial Data Systems IDS 160 - Manual (Page 17)

3.2.3 CONFIGURATION: PRINT WRAP.
1. Begin with the ENTER light OFF.
2. Turn the thumbwheel switch to position 1.
3. Press the ENTER switch. The ENTER light begins flashing.
4. Turn the thumbwheel switch to position 3.
5. Press the ENTER switch. The ENTER light turns on.
6. Turn the thumbwheel switch to position:
0 for PRINT WRAP --- OFF
1 for PRINT WRAP --- ON
7. Press the ENTER switch. The ENTER light turns off.
------------------ SET PRINT WRAP ------------------
FLASH ON OFF (Enter Light)
Print Wrap OFF 1 3 0 (Thumbwheel Switch)
Print Wrap ON 1 3 1 (Thumbwheel Switch)
REMEMBER: Return the thumbwheel switch to the correct mode position
after configuration