Inovonics FA201 - Manual

FA201
Frequency Agile™ 900MHz
Smoke detector transmitter
User Manual
Other Frequency Agile™
900MHz transmitters from Inovonics:
FA210 universal transmitter
FA210W universal widegap transmitter
Inovonics Corporation
2100 Central Avenue
Boulder CO 80301
(800) 782-2709
FAX: (303)939-8977
E-mail: [email protected]
LIT-FA201-USER Rev 1.10 12-Jan-99
FA201
Frequency Agile™ 900MHz
Smoke detector transmitter
User Manual
Other Frequency Agile™
900MHz transmitters from Inovonics:
FA210 universal transmitter
FA210W universal widegap transmitter
Inovonics Corporation
2100 Central Avenue
Boulder CO 80301
(800) 782-2709
FAX: (303)939-8977
E-mail: [email protected]
LIT-FA201-USER Rev 1.10 14-Dec-95
FA201 Programming
Program contacts: N/O
Typical battery life: 1 year (2 batteries required)
Batteries: 9.0V alkaline (Duracell MN1604)
(Batteries are always supervised)
1. Remove jumper from transmitter programming header.
2. When prompted to plug in transmitter, connect cable from
programming device to programming header on transmitter.
3. Press reset button on transmitter.
4. When programming is complete, disconnect cable.
5. Replace jumper on transmitter programming header.
P R O G R A M M
H E A D E R
R E S E T B U T
NOTE: The FA201 retains programming data in non-volatile
memory. If power is lost or removed, insert battery and press reset
button to re-initialize the transmitter and restore programming.
FA201 Programming
Program contacts: N/O
Typical battery life: 1 year (2 batteries required)
Batteries: 9.0V alkaline (Duracell MN1604)
(Batteries are always supervised)
1. Remove jumper from transmitter programming header.
2. When prompted to plug in transmitter, connect cable from
programming device to programming header on transmitter.
3. Press reset button on transmitter.
4. When programming is complete, disconnect cable.
5. Replace jumper on transmitter programming header.
P R O G R A M M
H E A D E R
R E S E T B U T
NOTE: The FA201 retains programming data in non-volatile
memory. If power is lost or removed, insert battery and press reset
button to re-initialize the transmitter and restore programming.