3 units – Inovonics TapWatch 3 User Manual
Page 29
Advertising
Site Information
05855E
28
4.3 Units
This screen shows transmitter and meter information for each unit.
Figure 4-3 Units Screen
4.3.1 Add New Unit
To add a new unit:
1.
Navigate to File > New > Unit; or, click on the asterisk below the last unit
listed.
2.
Fill in the necessary fields.
3.
When complete, press the Enter button on the keyboard.
4.3.2 Enable RF for Registration and Com Port Sniffer
To enable the RF gateway for end device registration and the Com Port
Sniffer:
1.
Navigate to File > Connect > Enable RF; or, click on the Enable RF
button.
Advertising