KEYENCE DL-DN1 - Manual (Page 58)

3-3 Explicit Messaging
3-32 - DeviceNet Compatible Network Unit DL-DN1 User’s Manual (SK-1000) -
3
Comm
u
nic
a
ti
ng
w
it
h th
e
SK-1
000 Se
ri
es
*1 The error content of the sensor amplifier can be checked by noting the ON/OFF
state of each bit.
OFF (0): No error; ON (1): Error
More than one error may occur simultaneously. For details of each error, refer to
the SK-1000 Series Instruction Manual.
*2 Details of output status can be checked by noting the ON/OFF state of each bit.
*3 Use this parameter in combination with the comparator value property or with
the comparator value "invalid," "over," or "under."
*4 - When in sample hold:
Value "-99.998" is output.
- When not in sample hold:
The
peak value encountered during the sampling period is output.
*5 - When in sample hold.
Value "-99.998" is output.
- When not in sample hold:
The
bottom value encountered during the sampling period is output.
*6 This is -999.8 when the temperature is not acquired correctly.
Nx10+4
7E Display digit R/W 0
0: Default
1: 0.001
2: 0.01
3: 0.1
4: 1
7F to
83
Reserved
Nx10+5
64 Group-5 entry count R 4
65 Distance correction method R/W 0
0: Initial state
1: User setting
66
Near-side distance correction
amount
R/W 25 5 to 50
67 Far-side distance correction amount R/W 100 60 to 120
68 Area scaling R/W 1.00 0.10 to 1.50
69 to
83
Reserved
Nx10+6
64 Group-6 entry count R 11
65 Product code R
Main unit: 4024
Expansion unit: 4025
66 Reserved
67 Connected sensor head R
0: Not connected
1: The head is connected
68 to
6B
Reserved
6C Product name 1 *16 R
Main unit: "SK-1"
Expansion unit: "SK-1"
6D Product name 2 *16 R
Main unit: "000/"
Expansion unit: "050/"
6E Product name 3 *16 R
Main unit: ""
Expansion unit: ""
6F Product name 4 *16 R
Main unit: ""
Expansion unit: ""
70 to
83
Reserved
8C Product name (16-byte reading) *19
Main unit: "SK-1000"
Expansion unit: "SK-1050"
InstID
(DEC) AttrID
(HEX)
Name Description Attribute
Default
value
Parameter range