Clarion M455 - Manual (Page 14)

16
M455
English
Loading a CD
Insert a CD into the center of the [CD SLOT]
with the label side facing up. “CD” or
“LOADING” appears on the display, the CD
enters into the slot, and play starts.
For CD (12 cm) For single CD (8 cm)
CD SLOT
Notes:
• Never insert foreign objects into the CD SLOT.
• If the CD is not inserted easily, there may be
another CD in the mechanism or the unit may
require service.
• Discs not bearing the mark and CD-ROMs
cannot be played by this unit.
• Some CDs recorded in CD-R/CD-RW mode may
not be usable.
Loading 8 cm compact discs
∗ No adapter is required to play an 8 cm CD.
∗ Insert the 8 cm CD into the center of the insertion
slot.
Ejecting a CD
1. Press the [ Q ] button to eject the CD,
“EJECT” appears on the display, take it out
from the ejected position.
Notes:
• Forcing a CD into the CD mechanism can
damage the CD or source unit.
The CD will automatically load after being placed
approximately 1/3rd of the way into the CD
mechanism.
• If a CD (12 cm) is left in the ejected position for
15 seconds, the CD is automatically reloaded
(Auto reload).
• 8 cm CDs are not auto reloaded. Be sure to
remove it when ejected.
Listening to a CD already inserted
Press the [FNC] button to select the CD mode.
Play starts automatically. If no CD is loaded in
the unit, “NO DISC” appears in the display.
Pausing play
1. Press the [ ] button to pause play.
“PAUSE” appears in the display.
CD Operations
2. To resume CD play, press the [ ] button
again.
Selecting a track
● Track-up
1. Press the [ d ] button to move ahead to the
beginning of the next track.
2. Each time you press the [ d ] button, the
track advances ahead to the beginning of the
next track.
● Track-down
1. Press the [ a ] button to move back to the
beginning of the current track.
2. Press the [ a ] button twice to move to the
beginning of the previous track.
Fast-forward/fast-rewind
● Fast-forward
Press and hold the [ d ] button for 1 second or
longer.
● Fast-rewind
Press and hold the [ a ] button for 1 second or
longer.
Top function
The top function resets the CD player to the first
track of the disc. Press the [BND] button to play
the first track (track No. 1) on the disc.
Scan play
Scan play locates and plays the first 10 seconds
of each track on a disc automatically. This
function continues on the disc until it is
cancelled.
∗ The scan play is useful when you want to select a
desired track.
1. Press the [SCN] button.
2. To cancel the scan play, press the [SCN]
button again.
Repeat play
Repeat play continuously plays the current
track. This function continues automatically until
it is cancelled.
1. Press the [RPT] button.
2. To cancel the repeat play, press the [RPT]
button again.