1 basic flow of operations, Operation flow from startup to shutdown, Basic flow of operations -2 – KEYENCE LS-Navigator User Manual
Page 28: Operation flow from startup to shutdown -2, Basic flow of operations
4
LS-Navigator-M-NO4-E
4-2
4-1
Basic Flow of Operations
The following chart shows the flow of operations for the LS-Navigator from startup to shutdown.
Operation flow from startup to shutdown
Connect the controller and the computer by using RS-232C.
Start up the controller and set it to [Measurement] mode.
Next, start up the computer.
Start up LS-Navigator.
In the [Select the settings to display at startup] dialog,
select the model for the controller that is connected to the computer and
choose the setting contents to read.
Page 4-4
Exit LS-Navigator.
Page 4-5
In the main window, the software can be used to display measurement
values, set programs on the controller, backup settings,
and send or receive setting files.
Page 4-5
Set the same RS-232C communication
conditions and settings as used on the
controller.
The settings are read from the
controller.
Page 4-4
When [Read controller
settings] is selected
When [Read from file] or [Start with
defaults] are selected, the software
reads the default values or the data
saved to a file.
Page 4-4
Set the same RS-232C communication
conditions and settings as used on the
controller.