KEYENCE LS-5000 - Manual (Page 49)

Chapter 6 Normal Mode
43
6
OFF
–A1/4
+A1
+A1/2
+A1/3
+A1/4
–A1
–A1/2
–A1/3
3. Set the calculation modes.
Every time you press the [CALCULATE] button, the setting changes as shown
below. (For AREA 1)
OFF: Calculation is set to OFF.
+A1: The measured value is output without changes.
+A1/2: The measured value is multiplied by “1/2”.
+A1/3: The measured value is multiplied by “1/3”.
+A1/4: The measured value is multiplied by “1/4”.
–A1: The measured value is multiplied by “–1”.
–A1/2: The measured value is multiplied by –1/2”.
–A1/3: The measured value is multiplied by “–1/3”.
–A1/4: The measured value is multiplied by “–1/4”.
Note:
OFF +A2 +A2/2 +A2/3
OFF +A3 +A3/2 +A3/3
OFF +A4 +A4/2 +A4/3
For AREA 2
For AREA 3
For AREA 4
OUTPUT MODE OUT1 LASER ON P. 1
+A1 OFF OFF OFF
AREA1 AREA2 AREA3 AREA4
100
AVERAGE
CAL-
CULATE
1 (0.833ms)
MEASUR-
ING MODE
SELF-TIMING
INTERVAL (ms)
NORMAL
DIGIT
SUPPRESS
NONE
ESC HELP NEXT
NOR
MAL
[CALCULATE] button